TextRanch

The best way to perfect your writing.

Discover why 1,062,726 users count on TextRanch to get their English corrected!

1. Input your text below.
2. Get it corrected in a few minutes by our editors.
3. Improve your English!

One of our experts will correct your English.

Our experts

some of the connectors were loose vs some of the connectors was loose

The correct phrase is 'some of the connectors were loose.' In this case, 'connectors' is a plural noun, so it should be paired with the plural verb 'were.' 'Some of the connectors was loose' is incorrect because 'was' is singular and does not agree with the plural noun 'connectors.'

Last updated: March 25, 2024 • 642 views

some of the connectors were loose

This phrase is correct and commonly used in English.

Use 'some of the connectors were loose' when referring to multiple connectors that were not securely attached.

Examples:

  • Some of the connectors were loose, so we had to tighten them before the system could function properly.
  • I noticed that some of the connectors were loose, which could be causing the connection issues.
  • After checking, we found that some of the connectors were loose and needed to be replaced.
  • It was clear that some of the connectors were loose, as they were not making a proper connection.
  • The technician discovered that some of the connectors were loose and needed to be secured.
  • Apply 1000 V DC between one of the connector pins and the housing of the natural gas detector for at least 2 seconds.
  • Further specifications of the connector area are given in Regulation No 44
  • Various properties of the connector can be adjusted including line thickness and color, this is done in the same way as for stencils.
  • Tjis is constructed i na way, that each mating of the connectors wipes over the contact surface, cleaning it each time.
  • The positioning of the connectors as specified in points 2.1.5.1.1 and 2.1.5.1.2 shall be arranged on the tractor as illustrated in Figure 1.
  • The location of the connector shall be capable of being easily identified and accessed (e.g. to connect an off-board tool).
  • Further specifications of the connector area are given in ISO 13216-1, Figures 2 and 3
  • The wires are to be inserted into the holes of the body of the connector.
  • Both the substitution of mercury in the connector and the elimination of mercury via substitution of the connector or the device are technically impracticable or have negative overall impacts due to an impact on patients' health.
  • Description of the connectors, couplings and safety devices (including drawings, sketches and the identification of any electronic parts):
  • That means that these connectors are not soldered but that the outer shield is pressed onto the shaft of the connector with a special tool.
  • These connectors were cut away from brackets on the wall to remove the smoke detectors.
  • The connectors shall comply with ISO 5676:1983.
  • This requirement shall be demonstrated by using the connector specified by the car manufacturer.
  • In addition to the connector, the article contains several different electrical components.
  • The connector is used in medical infusion sets.
  • The connectors are presented in sterile or unsterile packs.
  • Well, thewaterlikely corroded the connectors.
  • We'll have to watch the pressure at the connector.
  • Right where the connector feeds into the 10.

some of the connectors was loose

This phrase is incorrect in English.

  • Apply 1000 V DC between one of the connector pins and the housing of the natural gas detector for at least 2 seconds.
  • Further specifications of the connector area are given in Regulation No 44
  • Various properties of the connector can be adjusted including line thickness and color, this is done in the same way as for stencils.
  • Tjis is constructed i na way, that each mating of the connectors wipes over the contact surface, cleaning it each time.
  • The positioning of the connectors as specified in points 2.1.5.1.1 and 2.1.5.1.2 shall be arranged on the tractor as illustrated in Figure 1.
  • The location of the connector shall be capable of being easily identified and accessed (e.g. to connect an off-board tool).
  • Further specifications of the connector area are given in ISO 13216-1, Figures 2 and 3
  • The wires are to be inserted into the holes of the body of the connector.
  • Both the substitution of mercury in the connector and the elimination of mercury via substitution of the connector or the device are technically impracticable or have negative overall impacts due to an impact on patients' health.
  • Description of the connectors, couplings and safety devices (including drawings, sketches and the identification of any electronic parts):
  • That means that these connectors are not soldered but that the outer shield is pressed onto the shaft of the connector with a special tool.
  • The connectors shall comply with ISO 5676:1983.
  • This requirement shall be demonstrated by using the connector specified by the car manufacturer.
  • In addition to the connector, the article contains several different electrical components.
  • The connector is used in medical infusion sets.
  • The connectors are presented in sterile or unsterile packs.
  • Well, thewaterlikely corroded the connectors.
  • We'll have to watch the pressure at the connector.
  • Right where the connector feeds into the 10.
  • Someone broke the connectors and took the tanks.

Related Comparisons

What Our Customers Are Saying

Our customers love us! We have an average rating of 4.79 stars based on 283,125 votes.
Also check out our 2,100+ reviews on TrustPilot (4.9TextRanch on TrustPilot).

Why choose TextRanch?

Lowest prices
Up to 50% lower than other online editing sites.

Fastest Times
Our team of editors is working for you 24/7.

Qualified Editors
Native English experts for UK or US English.

Top Customer Service
We are here to help. Satisfaction guaranteed!