torque curve vs the torque curve

Both 'torque curve' and 'the torque curve' are correct, but they are used in different contexts. 'Torque curve' is commonly used in technical discussions or when referring to a specific curve, while 'the torque curve' is used when emphasizing a particular torque curve among others or when introducing the concept.

Last updated: March 22, 2024 • 695 views

torque curve

This phrase is correct and commonly used in technical discussions or when referring to a specific curve.

This phrase is used to describe the graphical representation of the torque output of an engine or motor over its range of operation.

Examples:

The torque curve of this engine peaks at 3000 RPM.
Understanding the torque curve is essential for optimizing performance.
The shape of the torque curve can vary depending on the engine design.
Analyzing the torque curve helps in selecting the right gear ratios.
The torque curve provides valuable information about the engine's power delivery.

Show examples from the web [+]

Generate engine map (maximum torque curve)
In no case, however, shall the torque curve be run by descending engine speeds for governed or turbocharged engines.
For generating the ETC on the test cell, the engine needs to be mapped prior to the test cycle for determining the speed vs. torque curve.
When generating the NRTC on the test cell, the engine shall be mapped before running the test cycle to determine the speed vs torque curve.
In no case, however, the torque curve shall be run by descending engine speeds for governed or turbocharged engines.
In no case, however, the torque curve shall be run by descending engine speeds for governed or turbocharged engines.
Generation engine map (max. torque curve)
For engines which are not designed to operate over a speed range on a full load torque curve, the maximum torque at the test speeds shall be declared by the manufacturer.
For generating the ETC on the test cell, the engine needs to be mapped prior to the test cycle for determining the speed vs. torque curve.
For generating the ETC on the test cell, the engine needs to be mapped prior to the test cycle for determining the speed vs. torque curve.
NRTC Generation engine map (max torque curve) Generate reference test cycle
For engines which are not designed to operate over a range on a full load torque curve, the maximum torque at the test speeds shall be declared by the manufacturer.
Generation engine map (max torque curve) Generate reference test cycle
The torque curve at full load shall be determined by experimentation to calculate the torque values for the specified test modes under net conditions, as specified in Annex 1, paragraph 8.2.
The resulting torque curve is the mapping curve and shall be used to convert the normalized torque values of the engine cycle into actual torque values for the test cycle, as described in paragraph 2. of this appendix.
The resulting torque curve is the mapping curve and shall be used to convert the normalized torque values of the engine dynamometer schedule of Annex IV into actual torque values for the test cycle, as described in section 4.3.3.
The torque curve at full load shall be determined by experimentation to calculate the torque values for the specified test modes under net conditions, as specified in Annex II, Appendix 1, section 8.2.
The resulting torque curve is the mapping curve and shall be used to convert the normalised torque values of the engine cycle into actual torque values for the test cycle, as described in section 2.
The resulting torque curve is the mapping curve and shall be used to convert the normalized torque values of the engine dynamometer schedule of Annex 5 into actual torque values for the test cycle, as described in paragraph 4.3.3.
If the speed and torque ramp runs through a point above the engine's torque curve, it shall be continued to command the reference torques and it shall be allowed for the operator demand to go to maximum.

Alternatives:

power curve
speed-torque curve
torque characteristics
torque output graph
torque performance plot

the torque curve

This phrase is correct and is used when emphasizing a particular torque curve among others or when introducing the concept.

This phrase is used when referring to a specific torque curve in a context where multiple torque curves are being discussed or when introducing the concept of a torque curve.