to the A/M subject vs to A/M subject

Some examples from the web:

• to the A/M subject
• High resistance to magnetic fields, from a minimum of 4.800 A/m up to 40,000 A/m in the Luminor Submersible 1950 Amagnetic: a limit more than eight times higher than that required by International Standards.
• In Moscow I had the a/m, which at the moment I didn't need the only cheaper, standing in somebody's garage.
• The A/M (auto/manual) selector appeared for the first time on an Asahi lens, this being the last Pentacon guided technical evolution at Pentax.
• Ingenieur 500'000 A/m The Ingenieur 500,000 A/m was engineered to withstand any magnetic field.
• In Moscow I had the a/m, which at the moment I didn't need the
• A small electrical current flows within the sheet, about 10-10 A/m².
• It is expressed in amperes per metre (A/m).
• Magnetic field strength:max. 80 A/m
• As the vicinity cards have to operate at a greater distance, the necessary magnetic field is less (0.15 to 5 A/m) than that for a proximity card (1.5 to 7.5 A/m).
• Magnetic field strength, H (A/m)
• These instruments can work in the polarization range J=0.1÷2 T up to a magnetic field H =20000 A/m).
• The maximum current density in the sheet is on the order of 10-10 A/m² (10-4 A/km²).
• In free space and in biological materials, magnetic flux density and magnetic field strength can be interchanged using the equivalence 1 A/m = 4π 10-7 T.
• When fitted to new cameras provided with a groove in the camera lens flange the near invisible A/M (Auto/Manual) locking pin on Super-Multi-Coated Takumars (not to be confused with the larger diaphragm release pin) locks the lens in AUTO position.
• The reasons for the sale of my a/m at a lower cost, associated with the fact that
• The reasons for the sale of my a/m at a lower cost, associated with the fact that I finished the work contract in Russia and I am back at work in South America in Peru.
• The magnet only loses its magnetic polarisation, and thus its total magnetism, by a demagnetising field strength of jHc.The standard unit of measurement used for a magnetic field strength is A/m (Ampere per metre).
• The reasons for the sale of my a/m at a lower cost, associated with the fact that I signed a work contract in the USA and changed the place of work and place of residence.
• Anti-magnetic protection to 25,000 A/m

Some examples from the web:

• For longer phrases (4+ words) it's not always possible to find identical examples. Please try again with a shorter phrase.

  For the very best results, we recommend that you submit your full sentence to our Quick Text editing service so a human editor can provide you with the right suggestions.