TextRanch

The best way to perfect your writing.

Discover why 1,062,726 users count on TextRanch to get their English corrected!

1. Input your text below.
2. Get it corrected in a few minutes by our editors.
3. Improve your English!

One of our experts will correct your English.

Our experts

the connector was not connected vs the connector is not connected

Both phrases are correct, but they are used in different contexts. "The connector was not connected" is used when referring to a past event, while "the connector is not connected" is used for the present situation. The choice between the two depends on the timeframe you are talking about.

Last updated: March 30, 2024 • 646 views

the connector was not connected

This phrase is correct when referring to a past event.

Use this phrase when you want to indicate that the connector was not connected in the past.

Examples:

  • I found out that the connector was not connected properly yesterday.
  • The technician realized that the connector was not connected during the installation process.
  • The wiring harness may be represented only by the relevant connectors (connected to the tested components) and a length of wire.
  • Trailers equipped with an ISO 7638:2003 connector as defined above shall be marked in indelible form to indicate the functionality of the braking system when the ISO 7638:2003 connector is connected and disconnected [23].
  • In the case of a trailer equipped with both an ISO 7638 connector and automated connector, the marking shall show that the ISO 7638 connector should not be connected when an automated connector is in use.
  • If the towed vehicle is equipped with an electrical connector as specified in point 2.1.5.1.3 of Annex I, this connector shall also be connected to the tractor simulator (see point 2. of Appendix 2).
  • The connectors are designed as universal (unisex) system and can be connected any to any.
  • The feedline is connected directly to the antenna, without losses by the connector.
  • For vehicles of category L1e with a mass in running order <= 35 kg vehicle movement by its own propulsion system shall be inhibited as long as the connector of the battery charger is physically connected to the external electric power supply.
  • If the on-board REESS can be externally charged by the user, vehicle movement by its own propulsion system shall be impossible as long as the connector of the external electric power supply is physically connected to the vehicle inlet.
  • To replace the power-driven vehicle, it is necessary to provide a simulator to which the coupling heads of the supply line, the pneumatic control line and/or the connector of the electric control line are connected.
  • Someone broke the connectors and took the tanks.
  • Well, thewaterlikely corroded the connectors.
  • The connectors shall comply with ISO 5676:1983.
  • The connector is used in medical infusion sets.
  • The connectors are presented in sterile or unsterile packs.
  • In addition to the connector, the article contains several different electrical components.
  • Right where the connector feeds into the 10.
  • Compliance with this requirement shall be demonstrated by using the connector or battery charger specified by the vehicle manufacturer.
  • Judging from the pressure variations in the connectors, they would need good finger dexterity.
  • And then they become the connectors that reach the consumer on your behalf.
  • Compliance to this requirement may be demonstrated either by using the connector specified by the car manufacturer, or by analysis.

Alternatives:

  • the connector had not been connected
  • the connector was left unconnected
  • the connector was not properly connected
  • the connector was disconnected

the connector is not connected

This phrase is correct when referring to the present situation.

Use this phrase when you want to indicate that the connector is currently not connected.

Examples:

  • Please check if the connector is not connected properly.
  • The manual clearly states that the connector is not connected in this configuration.
  • Trailers equipped with an ISO 7638:2003 connector as defined above shall be marked in indelible form to indicate the functionality of the braking system when the ISO 7638:2003 connector is connected and disconnected [23].
  • The wiring harness may be represented only by the relevant connectors (connected to the tested components) and a length of wire.
  • In the case of a trailer equipped with both an ISO 7638 connector and automated connector, the marking shall show that the ISO 7638 connector should not be connected when an automated connector is in use.
  • The connector is used in medical infusion sets.
  • If the towed vehicle is equipped with an electrical connector as specified in point 2.1.5.1.3 of Annex I, this connector shall also be connected to the tractor simulator (see point 2. of Appendix 2).
  • The fastening opens when the connector is attached to the syringe or infusion line and closes when it is removed, thus preventing the escape of liquid and the entry of air during the infusion.
  • The connectors are designed as universal (unisex) system and can be connected any to any.
  • The feedline is connected directly to the antenna, without losses by the connector.
  • the voltage of the live parts becomes equal or below DC 60V or equal or below AC 30V (rms) within 1 second after the connector is separated.
  • For vehicles of category L1e with a mass in running order <= 35 kg vehicle movement by its own propulsion system shall be inhibited as long as the connector of the battery charger is physically connected to the external electric power supply.
  • If the on-board REESS can be externally charged by the user, vehicle movement by its own propulsion system shall be impossible as long as the connector of the external electric power supply is physically connected to the vehicle inlet.
  • To replace the power-driven vehicle, it is necessary to provide a simulator to which the coupling heads of the supply line, the pneumatic control line and/or the connector of the electric control line are connected.
  • The benefit of the PowerPole connector is the construction of the mechanical contact.
  • Connect the first antenna with a short low loss cable to the splitter. Which of the two upper connectors is used doesn't matter.
  • The automated connector is of category A/B/C/D (2)
  • The Luer connector is used to connect the article to other tubes and/or devices (for example syringes) in a manner which prevents leakage.
  • Someone broke the connectors and took the tanks.
  • Well, thewaterlikely corroded the connectors.
  • The connectors shall comply with ISO 5676:1983.
  • The connectors are presented in sterile or unsterile packs.

Alternatives:

  • the connector has not been connected
  • the connector remains unconnected
  • the connector is improperly connected
  • the connector is disconnected

Related Comparisons

the data was not changing vs the data was not changed should be a simple vs should be the simple more complex vs not simple d vs the bike was not used very d vs the bike was not used

What Our Customers Are Saying

Our customers love us! We have an average rating of 4.79 stars based on 283,125 votes.
Also check out our 2,100+ reviews on TrustPilot (4.9TextRanch on TrustPilot).

Why choose TextRanch?

Lowest prices
Up to 50% lower than other online editing sites.

Fastest Times
Our team of editors is working for you 24/7.

Qualified Editors
Native English experts for UK or US English.

Top Customer Service
We are here to help. Satisfaction guaranteed!