sintering at vs sintering from

Both phrases are correct, but they are used in different contexts. 'Sintering at' is used to describe the temperature or conditions at which sintering occurs, while 'sintering from' is used to indicate the starting material or process that leads to sintering.

Last updated: March 31, 2024 • 433 views

sintering at

This phrase is correct and commonly used in the context of describing the temperature or conditions at which sintering occurs.

Use 'sintering at' when referring to the specific temperature or conditions at which sintering takes place, such as 'sintering at high temperatures'.

Examples:

The material undergoes sintering at 1200 degrees Celsius.
Sintering at elevated temperatures is essential for the process.
The ceramics are subjected to sintering at a controlled atmosphere.
The sintering process occurs at a specific temperature range.
Optimal results are achieved by sintering at precise conditions.

Show examples from the web [+]

enamels, defined as vitrifiable mixtures resulting from the fusion, vitrification or sintering of minerals melted at a temperature of at least 500 ºC.
In this case, we can see a laser sintering machine developed by EOS.
During that process the sintering or processing conditions set out in the opinion should be applied.
Installations for the roasting and sintering of metallic ores.
Unwrought molybdenum, incl. bars and rods obtained simply by sintering
Molybdenum bars and rods (other than those obtained simply by sintering), profiles, plates, sheets, strip and foil, n.e.s.
recovering sensible heat, if feasible, from the sintering grate waste gas
Selective laser sintering allowed me to map unimprint areas.
The second combustion stage is a burner at the kiln inlet, which produces a reducing atmosphere that decomposes a portion of the nitrogen oxides generated in the sintering zone.
Crushing, briquetting, pelletising and sintering
Presses for moulding metallic powders by sintering or for compressing scrap metal into bales
the sensible heat from the waste gases from the sintering machines
Shattering and breaking-up of bars of tungsten or molybdenum 'obtained simply by sintering'
The addition of mineralisers, such as fluorine, to the raw material is a technique to adjust the clinker quality and allow the sintering zone temperature to be reduced.
In ammonia control, sintering, or endogas production we take on your most complex applications to assist in your operations to change material properties.
The product concerned is certain tungsten electrodes (TE), including tungsten bars and rods, other than those obtained simply by sintering, whether or not cut to length.
for the ore roasting, sintering or pelletisation installation as individual activity of the integrated steelworks.
Combustion processes that take place at metal ore roasting, sintering or pelletization installations where fuels are not used as reducing agents or do not stem from metallurgical reactions shall be monitored and reported in accordance with Annex II.
1C240.b. refers to porous metal formed by compacting and sintering the materials in 1C240.a. to form a metal material with fine pores interconnected throughout the structure.
Note: Components and accessories specified in 1B101 include moulds, mandrels, dies, fixtures and tooling for the preform pressing, curing, casting, sintering or bonding of composite structures, laminates and manufactures thereof.

Alternatives:

sintering temperature
sintering conditions
sintering process
sintering environment
sintering parameters

sintering from

This phrase is correct and commonly used to indicate the starting material or process that leads to sintering.

Use 'sintering from' when referring to the material or process that initiates or precedes sintering, such as 'sintering from powder compacts'.