remove the cable vs disconnct the cable

Both phrases are correct and commonly used in English. They can be used interchangeably depending on the context. 'Remove the cable' implies physically taking the cable out, while 'Disconnect the cable' suggests separating the cable from its power source or connection.

Last updated: April 01, 2024 • 566 views

remove the cable

This phrase is correct and commonly used in English.

This phrase is used when you want to physically take out a cable from a device or a socket.

Examples:

Please remove the cable from the socket.
Make sure to remove the cable before opening the device.

Show examples from the web [+]

By the setup window - "Devices" section, it is possible to connect or not the optional devices without remove the cables.
Remove the USB cable and/or Ethernet cable.
Proper ejection: Do not remove the USB cable of your mobile phone during transfer process.
Remove the Ethernet cable from the printer.
The quad-band modem has a SIM holder that can be accessed by opening the front panel, without the need to remove the cables from the module itself.
Once files transfer will be completed remove the USB cable by using Windows safe procedure Hardware remove.
During the transfer process, if there is sudden power surge or if you abruptly remove the interfaced cable then you suffer from data loss.
Remove the USB cable from the navigation system or insert the
But equally, most of those strengths can also be seen as weaknesses. No cables removes the possibility of tuning the audio by trying different cable geometries and materials.
As the only machines of this type the ST300N is fitted with crushing rollers to crush cables which are difficult to cut - it is then easier to remove the insulation from the cable.
All shirts are 100% cotton and hand-washable/hang dry (do not launder in machines). Simply remove the driver unit and cables from the inside of the shirt.
Remove all cables from the connectors in the "TEST"
Figure 14 - To easily mount the cable, remove
Then switch off your desktop computer and remove all cable connections on the back
So... I contacted AN and asked what might be wrong, especially I wanted to cadge some of their cables to remove at least one variable.
In order to be allowed to remove the Plexiglas plate, the cables are interrupted by two plugs.
A "finger holder" helps to remove the plug, especially for young students, avoiding pulling of the cable.
Strip 2.5 cm of the jacket, copperfoil and inner insulator off the shorter Cable. Remove another 2.5cm of the outer insulator.
My task is to gather in the, to begin disassembly of the car, so far I have only included the removal of hideous soundproofing of the engine compartment, remove all remaining, cables clean and my "part" is ready.
Finally remove the insulation from all the single wires on the other side of the cable (the un-terminated one).

Alternatives:

unplug the cable
take out the cable
pull out the cable
disconnect the cable
detach the cable

disconnct the cable

This phrase is correct and commonly used in English.

This phrase is used when you want to separate the cable from its power source or connection without necessarily physically removing it.