liquid applied vs liquid-applied

Both "liquid applied" and "liquid-applied" are correct, but they are used in different contexts. "Liquid applied" is used when describing a substance that is applied in liquid form, while "liquid-applied" is used as a compound adjective to describe a product or material that is applied in liquid form.

Last updated: March 30, 2024 • 736 views

liquid applied

This phrase is correct and commonly used in English.

This phrase is used to describe a substance that is applied in liquid form.

Examples:

The waterproofing membrane is liquid applied for easy installation.
The paint is liquid applied to ensure even coverage.
The adhesive is liquid applied before attaching the tiles.
Liquid applied coatings provide a seamless finish.
The sealant is liquid applied to prevent leaks.

Show examples from the web [+]

During this 10-minute period, the cloth pad shall be soaked again with the mixture so that the composition of the liquid applied is continuously identical with that of the test mixture prescribed.
MEMBRANES, INCLUDING LIQUID APPLIED AND KITS (FOR WATER AND/OR WATER VAPOUR CONTROL).
where washing is carried out with liquids applied under pressure, re-contamination of the previously cleansed parts must be avoided;
Liquids can be applied undiluted, if appropriate.
The fasciculation around the lips would suggest that a liquid anaesthetic was applied.
Could've been applied in liquid form.
This method can be applied to liquid vegetable oils at ambient temperature (20 ºC).
Certain general and operational requirements should be applied to liquid assets to ensure they can be converted into cash within a short timeframe, subject to some exceptions for specified level 1 assets where appropriate.
Liquid test substances are applied to the cornea such that the entire surface of the cornea is evenly covered with the test substance; the standard volume is 0,03 mL.
The methods and devices described here can be applied to liquid and low melting substances, provided that these do not undergo chemical reaction below the boiling temperature (for example:
The methods can be applied to pure and to impure liquid substances.
The test method can be applied to both solid and liquid substances.
Liquid test substances (150 μL) are applied uniformly to the epidermal surface inside the tube.
For liquid materials, sufficient test substance must be applied to uniformly cover the skin surface: a minimum of 25 μL/cm2 should be used.
Liquid manure, including treated manure and slurries, shall be applied through low emissions application techniques.
European standard IEC 61619 and subsequently upgraded versions shall be applied as the reference method for the determination of PCBs in insulating liquids.
liquid test substances can be applied undiluted, if appropriate).
For liquid materials, sufficient test substance must be applied to cover the skin surface (a minimum of 25 µl/cm2).
The test substance (liquid or solid) is applied for 10 seconds and then rinsed from the eye with isotonic saline (approximately 20 mL) at ambient temperature.
For liquid as well as solid substances, sufficient amount of test substance should be applied to uniformly cover the skin surface while avoiding an infinite dose (see 1.2 Definitions), i.e. a minimum of 25 μL/cm2 or 25 mg/cm2 should be used.

Alternatives:

applied in liquid form
applied as a liquid
applied in a liquid state
applied in liquid state
applied in liquid

liquid-applied

This phrase is correct and commonly used in English.

This phrase is used as a compound adjective to describe a product or material that is applied in liquid form.