⚡ Black Friday Offer: Click here and shop now!

TextRanch

The best way to perfect your writing.

Discover why 1,062,726 users count on TextRanch to get their English corrected!

1. Input your text below.
2. Get it corrected in a few minutes by our editors.
3. Improve your English!

One of our experts will correct your English.

Our experts

cross sectional area vs cross-sectional area

Both "cross sectional area" and "cross-sectional area" are correct, but the hyphenated version "cross-sectional area" is more commonly used in English. The hyphen helps clarify that "cross" and "sectional" are connected, making the term easier to understand.

Last updated: March 26, 2024 • 690 views

cross sectional area

This phrase is correct but less common in English.

This phrase refers to the area of a surface or shape when viewed in a cross-section. It is used in various fields such as physics, engineering, and mathematics.
  • Where vtr is the train speed and Atu is the tunnel cross sectional area.
  • Cross sectional area of the isokinetic sampling probe
  • Minimum cross sectional area of inlet and outlet ports:.
  • Minimum cross sectional area of inlet and outlet ports:4.1.14.
  • If an integrating sphere is used the aperture of the sphere shall have a cross sectional area at least twice that of the parallel portion of the beam.
  • The target zone is an area on the underside surface of an axle box described by the intersection of the axle box with a virtual cuboid that has a horizontal cross sectional area given by the dimensions XTA and YTA using the rolling stock coordinates.
  • The horizontal cross sectional area of the virtual cuboid is therefore congruent to the plan view area (that is in the XY plane) of the target zone, herein named the target area.
  • Cross sectional area of the isokinetic sampling probe
  • Cross sectional area of the exhaust pipe
  • Cross sectional area of the isokinetic sampling probe
  • Cross sectional area of the exhaust pipe

Alternatives:

  • area of cross section
  • cross-section area
  • cross-sectional surface area
  • cross-sectional plane area
  • cross-sectional profile area

cross-sectional area

This is the more commonly used form of the phrase in English.

This phrase also refers to the area of a surface or shape when viewed in a cross-section. The hyphen helps clarify the connection between "cross" and "sectional."
  • .2 Ducts with a free cross-sectional area exceeding 0,075 m2 shall be fitted with fire dampers in addition to the requirements of sub-paragraph 9.2.2.1 above.
  • 2 Ducts with a free cross-sectional area exceeding 0,075 m2 shall be fitted with fire dampers in addition to the requirements of sub-paragraph 9.2.2.1 above.
  • Ducts with a free cross-sectional area exceeding 0,075 m2 shall be fitted with fire dampers in addition to the requirements of sub-paragraph.9.2.2.1.
  • A= cross-sectional area of test specimen.
  • Minimum cross-sectional area of inlet and outlet ports:3.2.1.14.
  • Minimum cross-sectional area of inlet and outlet ports:2.1.14.
  • tunnels (clearance and cross-sectional area),
  • a. Minimum 'cross-sectional area' less than 0,45 mm2;
  • The cross-sectional area shall be measured in a plane parallel to the surface on which the component is mounted.
  • where Fo indicates the initial cross-sectional area of the test-piece
  • The specifications concerning the free cross-sectional area of the tunnel are given in Point 4.3 "Specified performance" for the "tunnels and covered cuts" element (4.3.3.6).
  • tunnels (clearance and cross-sectional area),
  • Minimum cross-sectional area of inlet and outlet ports: cm²
  • For the purposes of 9E003.c., the 'cross-sectional area' is the area of the hole in the plane perpendicular to the hole axis.
  • For the purposes of 9E003.c., 'hole shape ratio' is the nominal length of the axis of the hole divided by the square root of its minimum 'cross-sectional area'.
  • Alternatively, a non-combustible air balance duct routed between the cabin and the corridor and located below the sanitary unit is permitted where the cross-sectional area of the duct does not exceed 0,05 m2.
  • The ratio of the cross-sectional area of the probe to that of the exhaust pipe shall not be less than 0,05.
  • The free cross-sectional area of the tunnel shall be determined so as to comply with the maximum pressure variation indicated above, taking into account all the types of traffic planned to run in the tunnel at the maximum speed at which the respective vehicles are authorised to run.
  • Cross-sectional area of the isokinetic sampling probe.
  • Caps shall possess vent-holes of sufficient cross-sectional area to evacuate gases if leakage occurs at the valves;

Alternatives:

  • area in cross section
  • cross section area
  • area across section
  • sectional area
  • area perpendicular to the cross-section

Related Comparisons

What Our Customers Are Saying

Our customers love us! We have an average rating of 4.79 stars based on 283,125 votes.
Also check out our 2,100+ reviews on TrustPilot (4.9TextRanch on TrustPilot).

Why choose TextRanch?

Lowest prices
Up to 50% lower than other online editing sites.

Fastest Times
Our team of editors is working for you 24/7.

Qualified Editors
Native English experts for UK or US English.

Top Customer Service
We are here to help. Satisfaction guaranteed!

×

⚡️ Black Friday 2024 ⚡️

Stock up on credits for the entire year!

Grab this offer now!