TextRanch

The best way to perfect your writing.

Discover why 1,062,726 users count on TextRanch to get their English corrected!

1. Input your text below.
2. Get it corrected in a few minutes by our editors.
3. Improve your English!

One of our experts will correct your English.

Our experts

configurations in test vs configurations in tests

Both phrases are correct, but they are used in different contexts. 'Configurations in test' is used when referring to a single test, while 'configurations in tests' is used when referring to multiple tests. The choice between singular and plural depends on the number of tests being discussed.

Last updated: March 25, 2024 • 649 views

configurations in test

This phrase is correct when referring to configurations within a single test.

This phrase is used when discussing the various configurations within a single test scenario.

Examples:

  • The different configurations in test A need to be analyzed thoroughly.
  • For UUTs where operation without a battery pack is not a supported configuration, the test shall be performed with fully charged battery pack(s) installed, making sure to report this configuration in the test results.
  • For systems where operation without a battery pack is not a supported configuration, the test may be performed with fully charged battery pack(s) installed, making sure this configuration is reported in the test results.
  • See the test bench configuration in figure 1.
  • In figure 1 an overview of the test bench configuration is given.
  • 8.1.3.5.5. For rearward-facing devices, the lower anchorage of configuration on the test trolley shall be as prescribed in Annex 6, Appendix 3.
  • The test configuration shall be defined with respect to the following objectives:
  • For rearward-facing devices, the lower anchorage of configuration on the test trolley shall be as prescribed in Annex 6, Appendix 3.
  • For engines tested with the dynamometer speed control test configuration:
  • Test in configuration of a special-type belt
  • With configurations below 5,56 m/s - test at 5,56 m/s.
  • With configurations above 11,1 m/s - test at 11,1 m/s.
  • This may look funny to you, but it does what it is supposed to do & mdash; test your configuration...
  • With configurations below 20 km/h - test at 20 km/h.
  • With configurations above 40 km/h - test at 40 km/h.
  • Small-Scale Servers shall be connected to a live Ethernet (IEEE 802,3) network switch as specified in Section II, 'Test Configuration', above, and that the connection is live.
  • For rearward-facing devices, the lower anchorage of configuration on the test trolley shall be as prescribed in Annex 6, Appendix 3.
  • The carbon flow check should be run at least each time a new engine is installed, or something significant is changed in the test cell configuration.
  • The carbon flow check should be run at least each time a new engine is installed, or something significant is changed in the test cell configuration.
  • Where a derogation applies then the applicant shall provide evidence confirming the scouring plant configuration and laboratory test reports demonstrating the breakdown of ectoparasiticides that may be present in scouring residues and sludge.
  • 8.1.3.5.2. For devices with short upper attachment straps, e.g. intended to be attached to the rear parcel shelf, the upper anchorage configuration on the test trolley shall be as prescribed in Annex 6, Appendix 3.

Alternatives:

  • configurations within the test
  • test configurations

configurations in tests

This phrase is correct when referring to configurations across multiple tests.

This phrase is used when discussing the various configurations that are common across multiple test scenarios.

Examples:

  • The configurations in tests A, B, and C are consistent.
  • For UUTs where operation without a battery pack is not a supported configuration, the test shall be performed with fully charged battery pack(s) installed, making sure to report this configuration in the test results.
  • For systems where operation without a battery pack is not a supported configuration, the test may be performed with fully charged battery pack(s) installed, making sure this configuration is reported in the test results.
  • See the test bench configuration in figure 1.
  • In figure 1 an overview of the test bench configuration is given.
  • 8.1.3.5.5. For rearward-facing devices, the lower anchorage of configuration on the test trolley shall be as prescribed in Annex 6, Appendix 3.
  • The test configuration shall be defined with respect to the following objectives:
  • For rearward-facing devices, the lower anchorage of configuration on the test trolley shall be as prescribed in Annex 6, Appendix 3.
  • For engines tested with the dynamometer speed control test configuration:
  • Test in configuration of a special-type belt
  • With configurations below 5,56 m/s - test at 5,56 m/s.
  • With configurations above 11,1 m/s - test at 11,1 m/s.
  • This may look funny to you, but it does what it is supposed to do & mdash; test your configuration...
  • With configurations below 20 km/h - test at 20 km/h.
  • With configurations above 40 km/h - test at 40 km/h.
  • Small-Scale Servers shall be connected to a live Ethernet (IEEE 802,3) network switch as specified in Section II, 'Test Configuration', above, and that the connection is live.
  • For rearward-facing devices, the lower anchorage of configuration on the test trolley shall be as prescribed in Annex 6, Appendix 3.
  • The carbon flow check should be run at least each time a new engine is installed, or something significant is changed in the test cell configuration.
  • The carbon flow check should be run at least each time a new engine is installed, or something significant is changed in the test cell configuration.
  • Where a derogation applies then the applicant shall provide evidence confirming the scouring plant configuration and laboratory test reports demonstrating the breakdown of ectoparasiticides that may be present in scouring residues and sludge.
  • 8.1.3.5.2. For devices with short upper attachment straps, e.g. intended to be attached to the rear parcel shelf, the upper anchorage configuration on the test trolley shall be as prescribed in Annex 6, Appendix 3.

Alternatives:

  • configurations across tests
  • tests' configurations

Related Comparisons

What Our Customers Are Saying

Our customers love us! We have an average rating of 4.79 stars based on 283,125 votes.
Also check out our 2,100+ reviews on TrustPilot (4.9TextRanch on TrustPilot).

Why choose TextRanch?

Lowest prices
Up to 50% lower than other online editing sites.

Fastest Times
Our team of editors is working for you 24/7.

Qualified Editors
Native English experts for UK or US English.

Top Customer Service
We are here to help. Satisfaction guaranteed!