attenuation vs damping

Both 'attenuation' and 'damping' are correct terms, but they are used in different contexts. 'Attenuation' is commonly used in the context of reducing the intensity of something, such as a signal or sound. 'Damping' is often used in the context of reducing the amplitude of oscillations or vibrations.

Last updated: March 25, 2024 • 1073 views

The term 'attenuation' is correct and commonly used in the context of reducing the intensity of something, such as a signal or sound.

"attenuation"

Use 'attenuation' when referring to the reduction in the intensity of something, such as a signal, sound, or wave.

Examples:

The attenuation of the sound waves made it difficult to hear the speaker.
The attenuation of the radio signal caused interference with the transmission.

Show examples from the web [+]

Actual attenuation of hopped wort - determined by a recommended method.
It may simply be a pattern of attenuation.
Other methods, such as the beta ray attenuation method and the tapered element oscillating microbalance (TEOM), are currently tested for equivalence with the gravimetric method by CEN WG15.
ADAM, beta ray attenuation, sequential, from OPSIS, Sweden,
Likely due to injury, given the attenuation of her collateral ligaments.
The requirements are expressed as attenuation relative to the maximum carrier power, combined with a fixed upper limit.
Adjust the attenuation setting to 70 decibels.
The determination of lateral attenuation for finite segments differs markedly for Lmax and LE metrics.
This document specifies a method for calculating the attenuation of noise during its outdoor propagation.
This loss of acoustic energy when the ray undergoes a reflection is called attenuation through retrodiffraction.
The calculation is identical to that of the attenuation by a barrier in the clear area.
Γ() Lateral attenuation distance factor
The length of each segment and number is strongly influenced by lateral attenuation.
The fullness of flavour is mainly due to the presence of unfermented residual extract, characterised by a difference between apparent and real attenuation.
Difference between apparent and actual attenuation: 1,0-9,0 (% rel.)
(j) the availability of hearing protectors with adequate attenuation characteristics.
Instrument sensitivity: from 4 to 16 times the minimum attenuation;
Lateral attenuation is a reflection effect, due to interference between directly radiated sound and that which reflects from the surface.
Until these are developed, the following methodology, described in AIR-5662, is recommended for calculating lateral attenuation.
Variation of lateral attenuation Λ(β,) with elevation angle and distance

Alternatives:

reduction
weakening
diminution
decrease
loss

The term 'damping' is correct and commonly used in the context of reducing the amplitude of oscillations or vibrations.

"damping"

Use 'damping' when referring to the reduction of the amplitude of oscillations or vibrations, typically in mechanical systems.

Examples:

The damping of the vibrations in the car suspension system improved the ride comfort.
The damping of the oscillations in the pendulum slowed down its movement.

Show examples from the web [+]

And the stabilizer gears on the magnetic damping rings.
Under no circumstances may the damping constant exceed 5 s.
damping or flotation fluids with a purity exceeding 99,8 %, containing less than 25 particles of 200 μm or larger in size per 100 ml and made from at least 85 % of any of the following compounds or materials:
damping or flotation fluids with a purity exceeding 99,8 %, containing less than 25 particles of 200 μm or larger in size per 100 ml and made from at least 85 % of any of the following:
Assessment and verification: a declaration of the VOC content in alcohols, washing agents, inks, damping solutions or other corresponding chemical products shall be provided by the chemical supplier.
Consumables include products such as printing inks and dyes, toners, overprinting varnishes, varnishes, adhesives, washing agents and damping solutions.
Frequency and damping of the oscillation of the sprung mass: ...
Especially designed or prepared bearing assemblies consisting of an annular magnet suspended within a housing containing a damping medium.
Frequency and damping of the oscillation of the sprung mass:
The inertial damping fields are barely operational and the warp drive containment field's on the verge of collapse.
or with damping of the return movement.
the topography of the facility site, including damping features;
with damping of the return movement;
The damping constant (63 % of the limit value) shall not exceed 0,4 s.
The rate-of-turn signal shall be received without additional damping beyond the limits referred to in Article 4.02 (1).
dynamic track features (horizontal and vertical track stiffness and track damping),
The damping ratio as a fraction of critical is >NUM>C >DEN>Co.
NUMK DENM - NUMC² DEN4M² The damping is critical when C = Cº,
The damping ratio Dr of the suspension with all hydraulic dampers removed or incapacitated must be not more than 50 % of Dm.
The first natural frequency of the impactor shall be over 5000 Hz and it is recommended to use damped accelerometers with a damping ratio of approximately 0,7.';

Alternatives:

absorption
attenuation
reduction
mitigation
suppression

How TextRanch works

Fast and reliable proofreading, editing, and language advice tailored to your needs.

1. Choose Your Service

Quick Text Editing

Emails and short texts
Proofreading & editing
Ready in 5-10 minutes

SUBMIT YOUR TEXT NOW

Document Editing

Documents of any type (*.docx)
Advanced & Premium editing
Ready in as little as 4 hours

UPLOAD YOUR DOCUMENT

Ask an Editor

Personalized answers to your language questions
Expert guidance on grammar, style, and usage
Ready in 24 hours

ASK YOUR QUESTION

Upload your document or paste your text directly into our platform. Your text is reviewed and refined by our expert editors (real people, not machines) who understand the nuances of English. Expect corrections, improvements, and insightful suggestions that enhance the clarity, tone, and professionalism of your writing.

3. Receive Your Polished Text

In just a few minutes (or hours for longer documents), you'll receive your corrected text. Review the changes, make any final adjustments, and confidently share your polished English with the world.
You can count on a personalized, friendly service every time you use TextRanch. We're committed to helping you make a great impression with every word you write.

We proofread and edit these types of texts and documents:

Short texts Business Emails Personal Emails Social media posts Resume and Curriculum Vitae Business documents Sales proposal Research and academic papers Thesis Dissertation Essays Articles Blog posts and much more....

Our Customers Love Us!

We have an average rating of 4.79 stars based on 283125 votes, and

4.9 Excellent - Reviews 2.137

"7 years without any disappointment. Always 100% satisfied. You guys are the best in the world at what you do. Thank you so much :)"

Zubair
from Bangladesh

"I wasn't aware of this service, it's fascinating and more reliable than standard IA tools available on the internet"

Arturo
from Mexico

"In a world of text messages and online communication, this is great to have as a live tool. Thank you."

Selena
from USA

"Wow, it's just so excellent. I never would have believed I could have a sure and excellent English companion. Thanks, TextRanch."

Ifiok
from Nigeria

"This is my first time using TextRanch, and I like how the editors take time to correct my text. To everyone who has never used TextRanch before, I highly recommend trying it."

Wilson
from France

"It is an amazing source of feedback because, as a non-native speaker, I really need to have a reliable helper correct my text."

Susan
from Germany

attenuation vs damping

"attenuation"

"damping"

Related Comparisons

2. Submit Your Text

3. Receive Your Polished Text